Embassyfashion Newsletter 7

QUALITY

With the transformation of the mens suit business into a world of designer fashion and the almost complete mechanization of its manufacturing process, determining the contemporary suit?s quality and intrinsic value is the most elusive challenge facing today?s shopper.

Like women?s ready-to-wear, the majority of mens tailored clothing today is sold on its name recognition, fit, and aura of fashionability.

The era when mens suits were expected to carry a man from one decade to another and were purveyed based on the relative merits of their quality and hand tailoring is as dated as sized hosiery, exact-sleeved dress shirts, and the three-piece suit.

Except for a handful of factories left in the world that continue to tailor suit primarily by hand, most clothing manufacturers have either incorporated the latest technology into their production process or closed shop.

The cost of skilled labor and the time required to create a garment in the old-world manner has limited this wearable market to those retailers and consumers who appreciate the quality and work behind the hand-stitched garments higher price.

In his hallowed fitting rooms the specialty retailer must be able to explain the nuances of this handcrafted creation from its silk thread and hand made buttonholes to the superiority of its worsted fabric.

Beginning in the 1920s, before machine started replacing tailors, suits were grads from 1 to 6 in a system that specified the number of hand operations used to create the final product.

For instance, a number 1, the lowest grade of suit, was almost entirely machine-made.

A number 2 coat could use some handwork to finish the cuffs, collar, and buttons.

A number 3 ha to have these three components finished by hand.

. A number 6, the highest grade on the scale, was made almost entirely by hand. Of course, some manufacturers would misrepresent these numbers in an attempt to sell their product at a higher quality rating it deserved, but at least the system gave the retailer and consumer some sort of uniform standard.

As technical improvement in machine-made clothes blurred the advantages of more costly hand crafting, tailored clothes have become creations of refined engineering and industrialized production.

With the tailors shears and hand-sewn stitches being replaced by computers, laser knives, conveyor belts, fusing, and high-speed pressing machinery, the modern mens suit has become a marvel of tailoring science and technological genius.

And as with any automates creation, the measure of its quality is time, in this case minutes.

The modern suit that sells for $395 takes approximately 80 minutes of uninterrupted labor, while the higher-profile designer garment retailing for $1,495 requires approximately 150 minutes of continuous construction.

In order words, little more than an hour of actual labor and quality control separate the least costly from the most expensive machine-made suit.

While the higher-prices suits shell fabric, linings, facings, and fusibles are more costly and produce a softer, more flexible garment, they do not account for the entire difference in retail price.

A good part of the disparity represents the expenses involved in operating a high-profile designer fashion business; publicity, advertising, fashion shows, and the overhead of a design studio.

Today, most mens suits are constructed in the same manner as a dress shirts collars and cuffs, whose outside layers are top-fused for permanent smoothness.

First developed during the 1950s, the process of bonding or gluing a layer to an outside shell fabric has evolved to a level where it can nearly simulate the softness and flexibility of the hand-sewn canvas used in tailored mens clothes.

Formerly, this layer of reinforcement places between the coats outer cloth and inner lining consisted of one or more ply of horsehair and regular canvas secured by numerous hand stitches.

When suspended by the elasticity of its hand make silk stitches, its free-floating dynamic gave the jackets front a lasting shapeliness and drape while lending pliancy and spring to the roll of its lapel.

The scientific advances seen in the development and performance of the more traditional artisan methods.

With the consumer requesting lighter, softer tailored clothing, these fusibles allow a cost to mold to the wearer, though they sacrifice fit and longevity in the process.

So, how does a man cut through all this industry mumbo jumbo to determine his prospective suits level of quality The answer is complex and difficult to translate into the written word, since these automated garments lack the visible handwork of top quality tailoring to act as benchmarks.

The cost efficiency of the new technology encourages manufacturers to incorporate many of the details associated with more expensive tailored clothed into less costly products, rendering the ranking of quality even less clear.

Crotch pieces and lines knees are no longer the exclusive province of the most expensively tailored suit trousers, while underarm sweat shields and machine stitching that appears hand-sewn grace jackets with less than lofty pedigree.

I will break down the subject into price brackets that represent various generic methods of manufacture so our investigation will have some boundaries and focus.

Please remember that this is a discussion about the quality of the products construction, not the beauty of its design.

As you will learn later, a wearable longevity is predicated more on its design than its quality.

A well-designed $350 suit can provide more years of wear than an expensive hand-tailored worsted cashmere suit whose shoulders look as though the hanger is still holding them up.

The finest ready-made suits are constructed like those that are custom-made, except the workplace has been organized into a miniature factory.

This means each garment is individually hand-cut, lining, pocket, and sleeves have all been sewn by hand; and everything is hand-pressed.

At this level of quality, the construction or padding of the jackets lapels and collar is stitched totally by hand.

There could be two thousand stitches or more in a single-breasted jackets lapel; these will hold the garments shape intact through all weathers, fair or foul.

For this rarefied ready-made suit, one must expect to pay at least &2,000.

The next ministep below this level of quality can boast the same level of workmanship, but the time-consuming lapel hand-basting is done by a special machine.

Those parts of the coat that need flexibility and movement continue to be sewn by hand - armholes, shoulders, collar.

At a minimum, you should be able to look at the inside of the jacket and confirm that the felling of its linings in these areas in hand done.

Next, you should take the coats bottom front, three inches from its bottom and two inches from its edge.

Rub it between the coats outer shell and inner lining. This confirms the coat has a canvas front rather than a fused one.

It is the work of a tailor and the garments shape will remain intact as long as it is well cared for. Selling for between $1,500 and $2,000, it will endure the ravages of extended wear.

Moving down to he next level of quality, you find the semitraditional or semi-canvas-front coat whose bottom front is fused but not its lapels, collar, and chest.

Its canvas inner lining floats, held in place by hand stitches so it moves more naturally with the coat. The beauty of this hybrid is that its lapels roll and stay on the coats chest more naturally than fused lapels will.

The canvas inner lining gives the lapels more spring so that their edges remain in contact with the jackets chest.

One can always tell a fused lapel because its edges tend to curl away from the jacket.

The semitraditional make has its shoulders, armholes, and collar hand-stitched so that the presentation around the mans face and upper torso appears supple and rich.

The cost for such a suit usually falls between $850 and $1,200.

The majority of todays tailored clothing is sewn completely by machine and constructed through fusing.

One version is made open or in what we call the American system.

Parts such as the sleeve and collars are assembled separately first, then put together.

In the Two-shell or German system, the entire inside lining shell is assembled separately from the outside fabric shell.

Then the one is sewn inside the other, The two-shell calls for less labor and prides itself on its consistency.

While requiring additional manufacturing steps, the American system utilizes more basting stitches, elements of make that in the end come out of the coat but help build in its enduring shape.

The price of this type of garment can range wildly, from $395 up to $1,495 depending on whose label is inside

The only thing one needs to consider when making a choice between the least expensive methods of tailoring is alterability.

Most men would never even consider this factor, but they must. Since the two-shell garment only has 3/8? Outlet in its seams, the man who gains ten pounds or more will find it impossible to have the coat let out.

Imagine spending $750 on a suit only to find out it cannot be altered the garment made in the traditional open way because its shape comes from building in curves while the engineered coat?s shape, due to its flat, straight-lined approach to make, will lose its shapeliness faster.

In conclusion, I would like to remind you that the aforementioned has been written as a general guide.

Within each of these categories, you will encounter garments that resist easy classification.

I hope the information passed on here will enable you to ask the correct questions when trying to get a grip on this difficult subject.

Email info@embassyfashion.com or kevin@embassyfashion.com for more information and or confirmation of offer acceptance.